NAME :
Semi Automatic Compression Testing Equipment ( Electrically Cum
Manually Operated (2 Pillar Model) fitted with Load Gauge (s) )
Compression Testing Equipment Electrically cum Manually (Hand)
Operated. The loads are measured on Bourdon tube type load gauges
which are calibrated against certified proving rings. The load
gauges are fitted with a maximum load pointer. In the Electrically
Operated Pumping Units, load gauges are fitted with micro switches
to switch-off the motor when the load approaches the maximum
capacity of the gauge, avoiding any over loading. Relays are
incorporated so that the motor does not restart on its own after a
power breakdown. The electrically operated pumping units are
provided with a control knob to adjust the pace rate which can be
effectively controlled by an experienced operator during the course
of testing, by observing the progress of the load gauge reading. The
electrically operated pumping units are also fitted with hand
operated pump.
|
|
(A)
Compression Testing Equipment Electrically cum Manually (Hand)
Operated fitted with single load gauge:
|
Cat. No. |
AT-111 |
AT-112 |
AT-113-1 |
AT-114-2 |
AT-114-3 |
AT-114-4 |
Capacity (In kN) |
250kN |
500kN |
1000kN |
1500kN |
2000kN |
3000kN |
Pressure Gauge (In kN) |
250kN |
500kN |
1000kN |
1500kN |
2000kN |
3000kN |
Least Count (In kN) |
1kN |
2kN |
5kN |
5kN |
10kN |
15kN |
Pressure Gauge
Diameter (mm) |
200 |
200 |
200 |
200 |
200 |
200 |
Vertical Daylight (mm) |
310 (Adj) |
310 (Adj) |
310 (Adj) |
310 (Adj) |
410 (Adj) |
410 (Adj) |
Horizontal Clearance (mm) |
210 |
210 |
260 |
280 |
330 |
380 |
Platen Diameter (mm) |
200 |
200 |
220 |
250 |
300 |
300 |
Ram Diameter (mm) |
83 |
117 |
165 |
181 |
234 |
234 |
Ram Travel (mm) |
50 |
50 |
50 |
50 |
50 |
75 |
Motor H.P |
0.5 |
0.5 |
1 |
1 |
1 |
2 |
Motor Voltage |
220V, 1Ph, 50Hz |
220V, 1Ph, 50Hz |
440V, 3Ph, 50Hz |
440V, 3Ph, 50Hz |
440V, 3Ph, 50Hz |
440V, 3Ph, 50Hz |
Specimen Size
(Can be Tested): |
|
|
|
|
|
|
Cube |
50mm, 70.6mm |
50mm, 70.6mm, 100mm |
100mm, 150mm |
100mm, 150mm |
100mm, 150mm, 200mm |
100mm, 150mm, 200mm |
Cylindrical |
- |
- |
100mm x 200mm, 150mm x 300mm |
100mm x 200mm, 150mm x 300mm |
100mm x 200mm, 150mm x 300mm |
100mm x 200mm, 150mm x 300mm |
|
( (B)
Compression Testing Equipment Electrically cum Manually (Hand)
Operated fitted with Two load gauges ):
|
Cat. No. |
AT-113-2 |
AT-115-1 |
AT-115-2 |
AT-115-3 |
Capacity (In kN) |
1000kN |
1500kN |
2000kN |
3000kN |
Pressure Gauge (In kN) |
1000kN, 250kN |
1500kN, 500kN |
2000kN, 500kN |
3000kN, 1000kN |
Least Count (In kN) |
5kN, 1kN |
5kN, 2kN |
10kN, 2kN |
15kN, 5kN |
Pressure Gauge Diameter (mm) |
200 |
200 |
200 |
200 |
Other Details |
Same as of AT-113-1 |
Same as of AT-114-2 |
Same as of AT-114-3 |
Same as of AT-114-4 |
|
( (C)
Compression Testing Equipment Electrically cum Manually (Hand)
Operated fitted with Three load gauges ):
|
Cat. No. |
AT-113-3 |
AT-116-1 |
AT-116-2 |
AT-116-3 |
Capacity (In kN) |
1000kN |
1500kN |
2000kN |
3000kN |
Pressure Gauge (In kN) |
1000kN, 500kN, 250kN |
1500kN, 1000kN, 500kN |
2000kN, 1000kN, 500kN |
3000kN, 2000kN, 1000kN |
Least Count (In kN) |
5kN, 2kN, 1kN |
5kN, 5kN, 2kN |
10kN, 5kN, 2kN |
15kN, 10kN, 5kN |
Pressure Gauge Diameter (mm) |
200 |
200 |
200 |
200 |
Other Details |
Same as of AT-113-1 |
Same as of AT-114-2 |
Same as of AT-114-3 |
Same as of AT-114-4 |
|
|