Strength Testing Moulds,Concrete Strength Testing Moulds,Strength Testing Moulds Suppliers,Concrete Strength Testing Moulds Exporters

Compressive Strength Testing Equipments

NAME : Concrete Strength Testing Moulds
Quality Standard: As Per IS 516, IS 10086

Specimen Casting Moulds in a number of standard sizes for determining the compression and flexural strength of concrete. The designs of moulds are such that during dismantling and re-assembly, these moulds attain accuracy of alignment. Cube Moulds, Cylindrical Moulds and Beam Moulds of various sizes are offered as below

Cube Mould:
Four standard sizes of cube moulds are offered and supplied complete with base plate.

Name & Cat No.	Description
Cube Mould: 126-1	Mortar Cube Mould 50 x 50 x 50mm with loose base plate. Made of Mild Steel.
Cube Mould: 126-2	Mortar Cube Mould 50 x 50 x 50mm with base plate. Made of Cast Iron.
Cube Mould: 127-1	Mortar Cube Mould 70.6 x 70.6 x 70.6mm with loose base plate. Made of Mild Steel.
Cube Mould: 127-2	Mortar Cube Mould 70.6 x 70.6 x 70.6mm with base plate. Made of Cast Iron.
Cube Mould: 129	Concrete Cube Mould 100mm x 100mm with base plate. Made of Cast Iron.
Cube Mould: 130	Concrete Cube Mould 150mm x 150mm x 150mm with base plate. Made of Cast Iron.
Cube Mould: 130 (b)	Concrete Cube Mould 150mm x 150mm x 150mm with base plate. Made of Cast Iron – Accuracy Equivalent to ISI Marked.

Beam Moulds
Two standard sizes of Beam Moulds are offered for casting concrete specimens for flexural strength testing. These moulds are made of cast iron and are supplied complete with a base plate.

Name & Cat No.	Description
Beam Mould: 133	Flexural Beam Strength Testing Beam Mould 100mm x 100mm x 500mm with base plate. Made of Cast Iron.
Beam Mould: 134-1	Flexural Beam Strength Testing Beam Mould 150mm x 150mm x 700mm with base plate. Made of Cast Iron.

Cylindrical Moulds
Moulds for testing concrete cylinders for Compressive Strength Testing are offered in two different sizes. These moulds are made of Cast Iron and split into two parts longitudinally. These are supplied complete with a base plate and top plate.

Name & Cat No.	Description
Cylindrical Mould: 135	Cylindrical Mould 100mm dia x 200mm ht with base plate. Made of C.I.
Cylindrical Mould: 136-2	Cylindrical Mould 150mm dia x 300mm ht with base plate. Made of C.I.

Send Enquiry

Send Enquiry

NAME : Flexural Strength Testing Machine

The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. The load is applied by the upward movement of a hydraulic ram. The jack can be raised or lowered for testing different size beams. The load is indicated on a calibrated Bourdon tube type Pressure Gauge of range: 0-100kN x 0.5kN (0-10,000 kgf x 50 Kgf). The load gauge is calibrated against NPL/ NCCBM certified proving ring.

Cat No.	AT-124	AT-125-1	AT-125-2
Capacity (In kN)	100kN	100kN	100kN
Pressure Gauge (In kN)	100kN	100kN	-------
Least Count (In kN)	½kN	½kN	0.1kN
Pressure Gauge Diameter (mm)	200	200	200
Vertical Daylight (mm)	310 (Adj)	310 (Adj)	310 (Adj)
Horizontal Clearance (mm)	210	210	210
Ram Diameter (mm)	83	83	83
Ram Travel (mm)	50	50	50
Motor H.P	-------	0.50	0.50
Motor Voltage	-------	220V, 1Ph, 50Hz	220V, 1Ph, 50Hz
Specimen Size (Can be Tested) Flexural Beams (cm)	10 x 10 x 50 15 x 15 x 70	10 x 10 x 50 15 x 15 x 70	10 x 10 x 50 15 x 15 x 70

Send Enquiry

Our Products