Vernier Transit Theodolite is designed to meet the requirements of Civil Engineer, Surveyor and Mining Engineer for high grade instruments giving a maximum portability. Both circles are totally enclosed making the instruments suitable for work either above or below the ground. The instrument is supplied with standard accessories in teak wood box with aluminium telescopic tripod stand.

Auto Level is designed to meet the requirements of Civil Engineer, Surveyor and Mining Engineer for high grade instruments giving a maximum portability. Magnification - 22x, standard Deviation for 1 Km Double Run Leveling - 2 mm. Supplied with Aluminium Telescopic Tripod Stand.

The liquid limit is defined as the moisture content at which the soil passes from plastic state to liquid state, it is very helpful in the classification of the potential properties of the soil material. The liquid limit device consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1 cm on to the hard rubber base, by the help of a lead screw provided at the back of the sliding carriage. Supplied complete with Casangrade grooving tool and gauge block.

Sieve Shaker Motorized carries 7 sieves, 20 cm diameter. The Sieve Shaker is driven by 1/4 HP motor through reduction gearbox. The shaker is fitted with timing switch. Suitable for operation on 220V, 50 HZ, AC Supply. The Adaptor for 30 cm dia sieves or 45 cm dia sieves also available on request.

This apparatus is used for determination of dry density of compaction. The Sand Pouring Cylinder 115 mm dia is fitted with conical funnel and shutter 3 liter capacity, cylinder calibrating container 100 mm dia x 150 mm ht, a metal tray 300 mm x 300 mm x 40 mm with 100 mm central hole.

The set comprises of Proctor Compaction Mould 100 mm internal dia x 127.3 mm ht with 1000 cc volume. Made of Gun Metal / Mild Steel with collar & base plate and Rammer 50 mm dia 2.6 kg weight with 310 mm Controller Fall (For Light Compaction).

CODE : AT-031 (A)
NAME : Proctor Compaction Apparatus

The set comprises of Proctor Compaction Mould 150 mm internal dia x 127.3 mm ht with 2250 cc volume. Made of Gun Metal / Mild Steel with collar & base plate and Rammer 50 mm dia 4.89 kg weight with 450 mm Controller Fall (For Heavy Compaction).

The unit consists of a pressure vessel with clamp for Sealing cap, rubber sealing gasket, pressure gauge calibration in percentage moisture content 0-25% on the wet weight basis (6 gm) counter poised balance for weighing samples, scoop for measuring reagent carbide, bottle of reagent carbide and cleaning brush. Complete in highly polished wooden carrying case with handle. The unit can be used to determine percentage moisture content on the wet weight basis upto 25% which is equal to 33.3% moisture content on the dry weight basis.
Same as above but 0-50% moisture meter also available.

1. 50 KN (5000 kgf) Capacity with Strain Rate of 1.25 mm per minute.
2. Load Frame, Electricity cum Manually Operated 220 V, Single Phase AC Supply.
3. CBR Mould with collar & base plate.
4. Penetration Piston, 50 mm dia with bracket.
5. Perforated Brass Swell Plate with stem & locknut.
6. Displacer Block 148 mm dia with T-Handle.
7. Annular & Slotted Metal Weight 2.5 kg.
8. Aluminium Tripod Stand.
9. Rammer 50 mm internal dia 2.6 kg & 4.89 kg.
10. Proving Ring 10 kn capacity with Calibration Certificate in teak wooden carrying case.
11. Dial Gauge 0.01 mm x 25 mm travel.